Filter cartridge - 350x1200 mm - ePTFE membrane - 20 m² for KEMPER
Our payment methods:
Paid in advance
Invoice
Product number:
15300520
Product information "Filter cartridge - 350x1200 mm - ePTFE membrane - 20 m² for KEMPER"
Replacement filter as a replica, alternative to KEMPER 1090447
Filter cartridge in the dimensions 350 x 1200 mm for use in:
High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 20 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A strap wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The Filter cartridge is easy to replace and is an alternative to KEMPER 1090447.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You can find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER devices
All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.
Filter cartridge in the dimensions 350 x 1200 mm for use in:
- KEMPER System 9000 (from 11/2007)
- KEMPER WeldFil
- KEMPER PlasmaFil (long filters)
- KEMPER CleanAirTower (CAT)
High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 20 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A strap wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The Filter cartridge is easy to replace and is an alternative to KEMPER 1090447.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You can find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER devices
All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.
| Alternative to manufacturer art. no.: | KEMPER 1090447 |
|---|---|
| Compatible devices: | KEMPER CleanAirTower (CAT), KEMPER PlasmaFil (long filters), KEMPER System 9000, KEMPER WeldFil |
| Dimensions : | 350 x 1200 mm |
| Dust classification: | M |
| Filter: | Replica filter |
| Filter area: | 20 m² |
| Filter by manufacturer: | KEMPER stationary devices / systems |
| Filter by type: | Filter cartridge |
| Filter efficiency: | ≥ 99,9 % |
| Filter material: | Polyester fleece with ePTFE membrane |
| Filter process: | Cleaning filter |
| Material: | Support basket made of expanded metal, encapsulated filter material |
Alternative filter cartridges
20 m²
Replica filter fit for
KEMPER CleanAirTower (CAT)
| KEMPER PlasmaFil (long filters)
| KEMPER System 9000
| KEMPER WeldFil
Available
20 m²
Original filter fit for
KEMPER CleanAirTower (CAT)
| KEMPER PlasmaFil (long filters)
| KEMPER System 9000
| KEMPER WeldFil
KEMPER 1090447
Available
Accessories
