Filter cartridge - 327x1200 mm - ePTFE membrane - 20 m² for KEMPER System 9000
Our payment methods:
Product number:
15300720
Product information "Filter cartridge - 327x1200 mm - ePTFE membrane - 20 m² for KEMPER System 9000"
Replacement filter as a replica, alternative to KEMPER 1090442
Filter cartridge in the dimensions 327 x 1200 mm for use in:
High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 20 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The Filter cartridge is easy to replace and is an alternative to KEMPER 1090442.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You will find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER System 9000 (before 11/2007)
All Replica filters in the filter.shop are tested and approved by KEMPER. The Devices warranty is therefore retained when using our Replica filters in the KEMPER System 9000.
Filter cartridge in the dimensions 327 x 1200 mm for use in:
- KEMPER System 9000 (before 11/2007)
High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 20 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The Filter cartridge is easy to replace and is an alternative to KEMPER 1090442.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You will find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER System 9000 (before 11/2007)
All Replica filters in the filter.shop are tested and approved by KEMPER. The Devices warranty is therefore retained when using our Replica filters in the KEMPER System 9000.
Alternative to manufacturer art. no.: | KEMPER 1090442 |
---|---|
Compatible devices: | KEMPER System 9000 (before 11/2007) |
Dimensions : | 327 x 1200 mm |
Dust classification: | M |
Filter: | Replica filter |
Filter area: | 20 m² |
Filter by manufacturer: | KEMPER stationary devices / systems |
Filter by type: | Filter cartridge |
Filter efficiency: | ≥ 99,9 % |
Filter material: | Polyester fleece with ePTFE membrane |
Filter process: | Cleaning filter |
Material: | Support basket made of expanded metal, encapsulated filter material |