Free shipping in Germany
Shipping within 24h
Purchase comfortable on account
Buy direct from the manufacturer
Hotline +49 (0) 2564-68-600

Filter cartridge - 327x600 mm - ePTFE - 10 m² for KEMPER

Product information "Filter cartridge - 327x600 mm - ePTFE - 10 m² for KEMPER"
Replacement filter as a replica, alternative to KEMPER 1090438

Filter cartridge in the dimensions 327 x 600 mm for use in:
 
  • KEMPER Filter-Master XL
  • KEMPER Filter-Cell XL
  • KEMPER System 8000 (before 11/2007)

High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 10 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.

The Filter cartridge is easy to replace and is an alternative to KEMPER 1090438.

Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You will find special filter cartridges with the same dimensions but a different design in the filter.shop.

Warranty retention when used in KEMPER devices

All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.
Alternative to manufacturer art. no.: KEMPER 1090438
Compatible devices: KEMPER Filter-Cell XL, KEMPER FilterMaster XL, KEMPER System 8000 (before 11/2007)
Dimensions : 327 x 600 mm
Dust classification: M
Filter: Replica filter
Filter area: 10 m²
Filter by manufacturer: KEMPER mobile units, KEMPER stationary devices / systems
Filter by type: Filter cartridge
Filter efficiency: ≥ 99,9 %
Filter material: Polyester fleece with ePTFE membrane
Filter process: Cleaning filter
Material: Support basket made of expanded metal, encapsulated filter material

Alternative filter cartridges

10 m²
Replikat-Filter fit for
KEMPER Filter-Cell XL | KEMPER FilterMaster XL | KEMPER System 8000 (before 11/2007)

KEMPER 1090438
Available
€228.48*
10 m²
ORIGINAL-Filter fit for
KEMPER Filter-Cell XL | KEMPER FilterMaster XL | KEMPER System 8000 (before 11/2007)

KEMPER 1090438
Available
€495.04*