Filter cartridge - 327x600 mm - PTFE coating - 10 m² for KEMPER
Our payment methods:
Prepayment
Invoice
Product number:
15300410
Product information "Filter cartridge - 327x600 mm - PTFE coating - 10 m² for KEMPER"
Replacement filter as a replica, alternative to KEMPER 1090438
Filter cartridge in the dimensions 327 x 600 mm for use in:
High-performance Cleaning filter made of Polyester fleece with PTFE coating and a Filter area of 10 m². The non-stick coating with PTFE ensures very good cleanability of the Filter material. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high filter efficiency of ≥ 99.9%. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The filter cartridge is easy to replace and is a cheaper polyester fleece alternative with a PTFE coating compared to the original KEMPER 1090438 cartridge, which has an ePTFE membrane.
Recommendation: In addition to this polyester fleece cartridge with a PTFE coating, we recommend the use of precoat - filter powder, which is also available an >> accessory << in our webshop Initial treatment of the filter with Precoat filter poweder increases the service life of the filter and improves cleaning efficiency.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You can find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER devices
All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.
Filter cartridge in the dimensions 327 x 600 mm for use in:
- KEMPER FilterMaster XL
- KEMPER Filter-Cell XL
- KEMPER System 8000 (before 11/2007)
High-performance Cleaning filter made of Polyester fleece with PTFE coating and a Filter area of 10 m². The non-stick coating with PTFE ensures very good cleanability of the Filter material. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high filter efficiency of ≥ 99.9%. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The filter cartridge is easy to replace and is a cheaper polyester fleece alternative with a PTFE coating compared to the original KEMPER 1090438 cartridge, which has an ePTFE membrane.
Recommendation: In addition to this polyester fleece cartridge with a PTFE coating, we recommend the use of precoat - filter powder, which is also available an >> accessory << in our webshop Initial treatment of the filter with Precoat filter poweder increases the service life of the filter and improves cleaning efficiency.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You can find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER devices
All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.
| Alternative to manufacturer art. no.: | KEMPER 1090438 |
|---|---|
| Compatible devices: | KEMPER Filter-Cell XL, KEMPER FilterMaster XL, KEMPER System 8000 (before 11/2007) |
| Dimensions : | 327 x 600 mm |
| Dust classification: | M |
| Filter: | Replica filter |
| Filter area: | 10 m² |
| Filter by manufacturer: | KEMPER mobile units, KEMPER stationary devices / systems |
| Filter by type: | Filter cartridge |
| Filter efficiency: | ≥ 99,9 % |
| Filter material: | Polyester fleece with PTFE coating |
| Filter process: | Cleaning filter |
| Material: | Support basket made of expanded metal, encapsulated filter material |
Alternative filter cartridges
10 m²
Replica filter fit for
KEMPER Filter-Cell XL
| KEMPER FilterMaster XL
| KEMPER System 8000 (before 11/2007)
KEMPER 1090438
Available
10 m²
Original filter fit for
KEMPER Filter-Cell XL
| KEMPER FilterMaster XL
| KEMPER System 8000 (before 11/2007)
KEMPER 1090438
Available
Accessories
